d3d10_1.dll download

layoutdll9.dll is a process belonging to the CommonSDK program . "layoutdll9.dll is a module" "belonging to CommonSDK" "from Sonic Solutions" So if you have any programs from Sonic Solutions installed on your computer, try repairing them or uninstall and reinstall it.

If you are running a HP laptop and Accelerometer.exe is mentioned in the header of the popup dialog, then you need to re-install the HP 3D Driveguard software, there is a known incompatibility with older versions of that software Here is the link to download HP 3D Driveguard - ftp://ftp.hp.com/pub/softpaq/sp75501-76000/sp75979.exe Otherwise, you need to download Visual C++ Redistributable for Visual Studio 2015 to repair that dll - https://www.microsoft.com/en-ie/download/details.aspx?id=48145

Hi Shy, The error message that you receive is related to DirectX essential components for your system to run a certain application. We would recommend that you check out this link . This will provide you steps on how to download the latest update on your device. Feel free to contact us if you have further inquiries. If you think this was useful, do not hesitate to “mark it as an answer” to help those who are facing the same problem.

Hi SteliosA, The msdia90.dll file is associated with “x64-based version of the Microsoft Visual C++ 2008 Redistributable Package”. This update was released on 12 July 2009. The file msdia80.dll can be removed from C: as it might have been duplicated. For your reference, I’m adding a link that talks about msdia.dll file. Description of the security update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package: July 28, 2009: http://support.microsoft.com/kb/973552 Hope this information is helpful. Let me know if this worked. All the best! Thanks and Regards: Syed V - Microsoft Support. Visit our Microsoft Answers Feedback Forum and let us know what you think.

Hi Juliant, Thank you for posting your query on Microsoft Community. Let me assist you. Provide us with the below details for better clarity on the issue. 1. What is the exact issue you are facing? 2. Do you receive any error message related to sysres.dll? The information provided by you is not enough for us to understand the issue. I suggest you to refer the link below providing steps to post a query on Microsoft Community in order to get the best responses. http://answers.microsoft.com/en-us/page/faq#faqAskQuestion1 In case you wanted to know about Sysres.dll, it is a non-system file which might originate from any software installed on your system. Please get back you us with the required details so that we can assist you further.

And your problem is ..... ?

Hi, Thank you for posting your query in Microsoft Community. I understand the inconvenience that you are experiencing. I will definitely help you in this. I suggest you to run sfc scan. System File Checker is a utility in Windows that allows users to scan for corruptions files and restore corrupted files . You can fix corrupted .dll files by running SFC scan not third party software .dll files. Follow the below link on how to run sfc scan applies to Windows 10. https://support.microsoft.com/en-us/kb/929833 Hope this information helps, please post us with status we will be glad to help you.

Please run a system file check (SFC) & DISM (if necessary) if you are on win 8 or higher All instructions are in our Wiki article below... Should you have any questions please ask us. System file check (SFC) Scan and Repair System Files

Can SFC scan be used on my Win 7 x64 OS or is there another tool? I'm wondering if I have a few bad or missing .dll files. I submitted a post on an issue with updating DirectX and the error logs that I was prompted to check.

Hi, · What is the exact error message that you encounter? · Since when are you facing this issue? · Do you remember making any changes to the system? I would suggest you to perform a SFC (System file checker) scan on the system and check whether the issue is resolved. Follow the steps mentioned in the article given below. Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe) http://support.microsoft.com/kb/310747 Thank you and Regards. Thahaseena M Microsoft Answers Support Engineer. Visit our Microsoft Answers Feedback Forum and let us know what you think.

I know a lot of people tend to recommend Malwarebytes in addition to Windows Defender Security Center but I have never been able to understand why. Back in the old days having a separate Malware Checker made sense (at least, once Microsoft stopped supporting their OneCare option) but with the introduction of Windows Defender Security Center it really isn't necessary. And can interfere with the Security Center working as it is intended. There are a few articles everyone should read to better understand why I say this: https://blogs.windows.com/windowsexperience/2017/01/23/introducing-windows-defender-security-center/#H1XBhutz8GHiHd4C.97 https://support.microsoft.com/en-us/help/4012986/windows-defender-track-your-device-performance-health and https://www.microsoft.com/en-us/wdsi Remember: Knowledge is Power!

https://support.microsoft.com/en-us/help/815065/what-is-a-dll Could you provide a few more details about your issue? ~bhringer dll library appeared when Windows Defender opened after I used Malwarebytes free..windows Defender will not work now the only thing showing is  dll library???

https://support.microsoft.com/en-us/help/815065/what-is-a-dll Could you provide a few more details about your issue? ~bhringer

.dll is the extension for drivers. Technically it stands for "Dynamic Link Library" (which means that saying dll library is like saying dynamic link library library) and it is pretty much synonymous with the .exe (or executable) extension. I would suggest you uninstall Malwarebytes and try running Windows Defender Antivirus (and Antimalware, btw) again. Malwarebytes tends to come with a trial subscription that will shut Defender off by default.

HI Marcelo, Mfc70.dll is the Visual C++ .net 2002 Runtime DLL. It usually comes up when you try to use some application that uses this DLL. When exactly are you getting the error? Do you remember making any particular changes to the system after which you started getting the error? If you are simply getting the error while opening up Visual C++ , you can try to uninstall and reinstall it back . Follow the link http://windows.microsoft.com/en-us/windows/uninstall-change-program#uninstall-change-program=windows-7 on how to uninstall a program If you are getting the error while opening some application, then again either reinstalling the visual studio (If you have it installed ) might help .Or it might be that the application itself is corrupt .Since Every tool needs a Runtime. In this case, the MFC library DLL from Visual Studio 2002 is missing. The application developers must include this DLL in their setups .Also , you can verify this by running the application on some other system . A

What makes you believe it is a virus? Download / install & run anti-malware app: Malwarebytes (Free version); link below; https://buy.malwarebytes.com/bundle/au/?ht=malware&c=b-bx01-au&s=036e.o40&k=malwarebytes%20download&t=kwd-132013601715&raw=malwarebytes%20download&bclid=02c3d358ed8742a895b079fba1161968&url=https%3A%2F%2Fbuy.malwarebytes.com Where/when does the icon appear? Also run a full scan with your AV app.

Ciao, I am sorry, I do not understand what you are looking for, please explain further and I will be happy to oblige . . .

You could download it from the HP support website, though I doubt you will be able to as there does seem to be an issue with your browser downloading files - have you tried a different browser . . .

Glad to help, if you have any more questions, please contact us here at MS Community!

Unable to download sp75979.exe.  After clicking on "Click Here" I choose "Download folder" A small rectangle appears on lower left, it gradually fills from the left in blue.  When the blue has filled the entire rectangle, clicking on it opens a small window with 3 choices "Clear", "Show in Folder" or cancel.  Only the "Cancel" is in bold.  No choice to view in Folder and activate.  I've tried several times, with same result, waiting about 10 minutes to  complete download. If I open the "Download Folder" directly, SP75979.exe does not appear.  Is there another way to get this file?

If you are running a HP laptop or PC: The error is generated by their 3D DriveGuard software - or more precisely the Accelerometer.exe component of that software, you need to go download the fix they have just released - Click HERE

Hi William, This file is used by MS Visual C++ for Visual Studio 2015. It is installed by the software that requires this file. We suggest reinstalling MS Visual C++ for Visual Studio 2015 on this article . If you need further assistance, don't hesitate to reach out.

Seems to have corrected the issue, thank you

I think I didn't do my 1st reply correct. I d/loaded the H.P.sp75979. Created a Restore Point, and did install exe. Restarted p.c. GREAT not seeing that dang error message and of course it would work coming from H.P.  But, since you posted the link, if I didn't have come across it. I'd still be reading everything about the error. Please let me tell you how I and everyone who will use your answer will be so appreciated.

I am unable to download sp75979.exe  to fix accelerometr problem missing vcruntime140.dll

I am unable to download sp75979.exe  to fix accelerometr problem missing vcruntime140.dll Please explain what happens when you click that link, the file should automatically download from the HP server!

Hi, It is possible that the system files on your computer has been corrupted. To diagnose the issue, we would like to ask a few questions: When did the issue start? Were there any changes made on your computer prior to this concern? For the meantime, we advise that you run the System File Checker tool to repair missing or corrupted system files. Do update us with the outcome and if you need further assistance. Regards.

See: https://www.thewindowsclub.com/api-ms-win-core-... Disclaimer: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

Hi, Sorry for the inconvenience caused to you, Thank you so much for your valuable question please, I would suggest you to please see the below mentioned thread and see it if it helps. I am hopeful that your query will be resolved, If the issue persists kindly do let me know,waiting for your kind reply please. Please check the solution given by JoeFerrer https://answers.microsoft.com/en-us/windows/for... Please let me know, if that helps and feel free to ask back any question. Kind Regards: Yasir

Could be more specific? What are you experiencing in regards to .dll files?

Hi, It is not compatible with Windows 7. Microsoft Office 97 Specs - CNET OS Required. Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 3.51 Service Pack 5 or later @@@@@@@@@@@@@@@@@@@@ " Make older programs run in this version of Windows " http://windows.microsoft.com/en-us/windows/make-older-programs-run#1TC=windows-7 Or: You may be interested in using either of these two free Office Suites which are compatible with Windows. Open Office: https://www.openoffice.org/ Libre Office: https://www.libreoffice.org/ Cheers.

Hi Barbara, This issue might occur due to a corrupted file. We suggest that you check RichardEiler 's post from this thread and follow the instructions. Other Community members found it helpful. We would appreciate it if you could get back to us and provide us your feedback.

There may be a conflict with this older Free Studio DVDVideoSoft software .DLL and recent updates to Windows 7 (including Internet Explorer 11). There is an excellent thread covering this subject and rather than simply regurgitate the solution(s) back here, I would like to point you to that thread. This PC loads very slow and crashes more often If you cannot find a satisfactory solution, post back and more assistance may be available.

Hi Mike, this is caused by a corrupt Visual C++ Redistributable, the version you need to reinstall is the 2015 version Open Control Panel - Programs and Features Uninstall the 2015 version (do not uninstall any other version of the Visual C++ Redistributable) Click this link to download Microsoft Visual C++ 2015 Redistributable Install the Redistributalbe and restart your PC https://www.microsoft.com/en-ie/download/detail...

Hi Mike. I'm Greg, an installation specialist and 8 year Windows MVP, here to help you. The download could have become corrupt so I'd use a fresh one to be sure. If not then it likely needs to have Visual C++ Runtime installed for that program, which it should have prompted for but might not: https://support.microsoft.com/en-us/help/297700... I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it's resolved.

Hi, Looks for me windbg wants to download the dlls first. Does it help, if you retrieve the respective dlls from the installed redist and point .exepath to them before the .reload? Please let me know, if that helps. Kind Regards: Engr. Malik Yasir

See http://answers.microsoft.com/en-us/protect/forum/protect_other-protect_scanning/remove-notice/fde3917c-f880-4a6e-af5c-268d772598ec

Hi, 1. When exactly are you receiving this error message ? 2. What is the complete error message you are receiving? 3. Have you made any recent software or hardware changes on the system? Todgub6.dll is a TODG6UB belonging to TODG6 from APEX Software Corporation. If you are able to boot in normal mode, then let’s try the following steps and check if it helps. Method 1: If you are using any software from Apex, you may try to uninstall and reinstall the same. Uninstall or change a program Method 2: If you haven’t installed any APEX Software, you may try performing a clean boot and check if it helps. A clean boot helps to verify if any third party application services or startup item is causing this issue. How to perform a clean boot to troubleshoot a problem in Windows Vista, Windows 7, or Windows 8 Note: After you have finished the troubleshooting, try the steps provided in the section “How to reset the computer to start as usual after troubleshooting with clean boot” to boot the system

Hi, Welcome to Microsoft Community. When do you get this error message? Did you make any changes before you started getting the error message? SentinelKeyW.DLL is a type of DLL file associated with Sentinel Keys developed by Windows Software Developer for the Windows Operating System. For now I suggest you to refer Run DISM scan: Type the following command in Run Window. Type cmd in the search and right click on cmd from the search and click on Run as administrator "Type the following command" Dism.exe /online /cleanup-image /restorehealth. Restart the computer. regards,

First, uninstall any existing versions you might have for version 2010: This issue might if the Microsoft Visual C++ 2010 Redistributable Package is not installed properly. I suggest you to uninstall any existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package to check if it helps. Follow the below steps: Step 1: Uninstall the exiting Microsoft Visual C++. a) Press Windows key + x key and select Apps and Features. b) Select the Microsoft Visual C++ 2010 and uninstall it. Step 2: Download the latest Microsoft Visual C++ and install it. Refer to the below link: 32 bit - http://www.microsoft.com/en-in/download/details... 64 bit - http://www.microsoft.com/en-us/download/details... MSVCR110.dll is the Microsoft Visual C++ Redistributable dll that is needed for projects built with Visual Studio 2010. This error appears when you are trying to run a software which require Microsoft Visual C++ Redistributable 2010. If the iss

Hi James, you need to download and install Microsoft Visual C++ 2010 Redistributable Packages Install both the 32bit and 64bit versions . . . For 32bit: Microsoft Visual C++ 2010 Redistributable Package (x86) http://www.microsoft.com/en-in/download/details... For 64bit: Microsoft Visual C++ 2010 Redistributable Package (x64) http://www.microsoft.com/en-us/download/details...

HI trocco I found some information that could be useful for you. check this link that describe the issue and how to solve it http://support.microsoft.com/kb/982305 I hope you have Succeed.

Just chiming in here with another experience...  It was both Outlook and Excel 2010 that didn't work for me.  All the other Office apps worked fine.  Here is the exact error message I received: EXCEL.EXE - System Error The program can't start because MSVCR90.dll is missing from your computer.  Try reinstalling the program to fix this problem. Rebooting, running Windows Update and Repairing the Office 2010 application did nothing to fix it. I uninstalled the Security Update for Microsoft Excel 2010 and like you guys that made Excel work fine.  Outlook is still broken though and there doesn't appear to be a similar security update for that which I can see yet.

Follow the steps mentioned in the links and check if it helps: http://social.technet.microsoft.com/Forums/en-US/officesetupdeployprevious/thread/5504d74e-48a7-4ca5-a7e0-709afb0ec231/ http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/outlook-2010-new-install-msvcr90dll-missing/29e8ed56-e7da-4cf6-a6f7-f9015e54e022 http://social.technet.microsoft.com/Forums/en-US/outlook/thread/31cd1d95-0e7e-4344-927e-61321fcb1e52/ If nothing helps from the links, uninstall and reinstall Office.

In addition to the steps suggested by Gerard you can also repair Office and check if it helps. Refer the link below to repair Office 2010 http://office.microsoft.com/en-us/sharepoint-workspace-help/repair-or-remove-your-office-programs-HA010357402.aspx

Neo, Uninstalling the security update for Execll 2010 worked for me as well, Craigh455

On Wed, 1 Dec 2010 18:31:32 +0000, Trocco wrote: I get an MSVCR90.DLL error when I start Excel Try Excel without add-ins to see if that helps. Hold ctrl while clicking the Excel icon to start Excel in safe mode. Tab file -> options -> add-ins ... to manage add-ins. Gérard

I uninstalled a recent excel update. fixed the issue right away Thx

this error was driving me crazy. After installations and unistallations, i realized that this issue was starting after updates from microsoft. As soon as a specific update was install the problems would start. I started unistalling updates. The issue is not SP1 but a specific security update for excel 2010. As soon as i unistalled it, the issue was gone. If you click programs and features and then "view installed updates" you will see a security update specifically for Excel 2010. Unistall it and everything will be good again :)

I called microsoft tech and they fixed my dll issue

Hi, Are you facing issue while installing Office? If yes, try troubleshooting steps from the article below and check if it helps. https://support.office.com/en-us/article/Troubleshoot-installing-Office-2016-and-Office-2013-35ff2def-e0b2-4dac-9784-4cf212c1f6c2 Hope it helps. Reply with the result and I'll be happy to help you further. Thank you.

Hi AlG9 Advrcntr2.dll is a component of Nero Burning ROM, the only way yo will get that file is to uninstall and then re-install Nero. You will find websites on the net that offer that file for download, avoid them at all costs, you should never download a dll file from the web, it is very dangerous . . .

Hello, Apparently you want to receive support in English, therefore I've moved your thread from Turkish Community to the English one. Regards.

Hi, This file is part of DirectX Runtime June 2010, which is a optional update that a lot of games need. This is a self extracting package. It will extract after double clicking on it so be sure to note the location where you\it extracted. Then open the folder and double click DXSETUP. http://www.microsoft.com/en-us/download/confirmation.aspx?id=8109 Which folder should I put it in? I am doing this for League of Legends.

This Solved all my problems after a re-Install of Windows 10. I had all my simulators/games installed on a separate drive so I wouldn't lose the install and progress. I ran into a boot problem and as said above re-installed windows 10. Upon creating shortcuts and testing each game I ran into a few games and  wouldn't start cause of various DXd3d_# error's. Consider the problem solved....Thank's slance310 for linking.

Hi, I don't know much about specific games... some may have different requirements... I think that once the package has extracted, it will install to the System32 folder... It's like a ZIP File... you just tell it where to extract to... just so you can find it... Then install it like any other program... I put mine in the Downloads folder along with the original file...

I encountered this issue when trying to run Warhammer 40,000: Dawn of War II. I think that it will occur for various different games.  I'm using Windows 10. When did you receive the error? When trying to play a game. Which version of Microsoft Visual C++ is installed on the computer? I didn't install any version of this. I have a clean install of Windows 10. Have you made any changes on the computer prior to the issue? No. I have installed all updates. Running the command sfc /scannow resulted in the message Windows Resource Protection did not find any integrity violations. Installing the DirectX Runtime June 2010 as mentioned by @slance310 makes it possible to run this game. So it seems that Microsoft has not enabled Windows 10 to run DirectX 9 games...

Hi Reba, Thank you for posting in Microsoft Community. I regret the inconvenience caused to you. Let me help you. In order to provide you with a quick resolution, please reply to these questions: When did you receive the error? Which version of Microsoft Visual C++ is installed on the computer? Have you made any changes on the computer prior to the issue? Follow the suggestions listed below for a possible fix: You may run System File Checker [SFC] scan on the computer which will replace the missing or corrupt files & check if the issue persists. Type ‘ cmd ’ in start search box. Right click on cmd in the Program list and then select the option Run as administrator . Note: If you are prompted for an administrator password or for confirmation, type your password, or click Continue. Type the following command, and then press ENTER : sfc /scannow For more information refer to this article: How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows

Hi, This file is part of DirectX Runtime June 2010, which is a optional update that a lot of games need. This is a self extracting package. It will extract after double clicking on it so be sure to note the location where you\it extracted. Then open the folder and double click DXSETUP. http://www.microsoft.com/en-us/download/confirmation.aspx?id=8109

What program are you attempting to use? Please try a repair of Windows Essentials 2012. Windows Essentials 2012 contains the following programs: Photo Gallery Movie Maker Windows Live Writer Windows Live Mail OneDrive Go to Control Panel > Programs > Programs and Features Select Windows Essentials 2012, right click, and select Uninstall/Change. The following should appear: Select the second choice: Repair all Windows Essentials Programs

What program are you attempting to use? Please try a repair of Windows Essentials 2012. Windows Essentials 2012 contains the following programs: Photo Gallery Movie Maker Windows Live Writer Windows Live Mail OneDrive Go to Control Panel > Programs > Programs and Features Select Windows Essentials 2012, right click, and select Uninstall/Change. The following should appear: Select the second choice: Repair all Windows Essentials Programs What program are you attempting to use? Please try a repair of Windows Essentials 2012. Windows Essentials 2012 contains the following programs: Photo Gallery Movie Maker Windows Live Writer Windows Live Mail OneDrive Go to Control Panel > Programs > Programs and Features Select Windows Essentials 2012, right click, and select Uninstall/Change. The following should appear: Select the second choice: Repair all Windows Essentials Programs thank you bvery much was very helpful

Hi kiwikid, Thank you for posting your query in Microsoft community! I understand that you have a problem when you are trying to perform an upgrade from HP support assistant. Please correct me if I am wrong. I will try to help you with the issue as soon as possible. 1) What upgrade are you trying to perform from HP support assistant? Perform clean boot to check whether it is a software conflict issue. Putting your system in clean boot state helps in identifying if any third party applications or startup items are causing the issue. Clean boot: http://support.microsoft.com/kb/929135 Note: After clean boot troubleshooting step, follow the “Steps to configure Windows to use a Normal startup state” in the provided link to return your computer to Normal startup mode. I would suggest you to contact the software manufacturer for assistance. Conatct HP http://www8.hp.com/ca/en/contact-hp/contact.html HP Support Assistant http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html Please

Hi John, AVCodec is a free software/open source LGPL-licensed library of codecs for encoding and decoding video and audio data. Many third party applications that require video encoding integrate this LGPL library within the program for video playback functionality. We require following information from you to assist you better. What is the exact/complete error message you get? When do you get this error message? Are you playing any video or audio files? You can refer to the steps given in the link below to provide more information regarding the issue. Effective questions get help faster!! http://answers.microsoft.com/en-us/windows/wiki/windows_other-system/effective-questions-get-help-faster/18584631-7f2b-4f01-88f5-f6660a5943c3 I see that you have created another post with the same issue for Window XP. Are you facing this issue with Windows XP as well? http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/need-avcodec-53dll/44a4a33d-27da-4210-ae8c-144963cece46 Write to us

If you are getting this message from Running a or Launching a Specific program. Try to Uninstall and Reinstall. that way it will re-register the MFC140.DLL on the library. if Reinstalling did not help. try applying a System Restore to bring back the previous state of the software. when it was working Press Windows key + R key then type : RSTRUI Click OK and follow on-screen instructions.

Wow, what sort of ancient program are you using that requires a Visual Basic 4 DLL? Anyway, it's available here . (It's a wonder that download link still works for a file that's more than two decades old!)

We arent able to help you unless you help yourself by providing us with as much information as possible. Suggestions for asking for help on a site. http://support.microsoft.com/kb/555375 http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/what-information-to-post-in-the-windows-update/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

Hi GalenFinn, Thank you for posting your query on Microsoft Community. As per the issue description you are getting .dll file missing error. This error message comes if some system files are missing or get corrupted. So, I would suggest you to check the system files are they working fine or not and to check that try to run System File Checker (SFC) tool. SFC scan will scans all protected system files and replaces incorrect versions with correct Microsoft versions. How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 8. Press Windows key and X at the same time. Choose Command Prompt (Admin) from the context menu. In the command prompt, type sfc /scannow and hit Enter. Exit command prompt . For more information refer to this link: Use the System File Checker tool to repair missing or corrupted system files http://support.microsoft.com/kb/929833/en-us Do get back to us with the result of the scan, so that we can assist you further if require

Are you running a HP system?

Contact Word Perfect (i.e., Corel) Support for assistance.

Hello WilliamCkarjzt, This thread was created in the Windows Update forum; the Microsoft Moderation team has moved this thread to the System Repair and Recovery Forum.

Hi, Ensure no older version of Microsoft Office is installed which includes Outlook apart from Microsoft Office 2007. If multiple versions exist uninstall all the versions of Microsoft Office except Office 2007. Ensure Outlook 2007 is included in Office 2007 installation. For more help to add components in Office 2007 installation check this link: http://support.microsoft.com/kb/924611 Disclaimer:  This section, method, or task contains steps that tell you how to register DLL files. However, serious problems might occur if you modify the DLL files incorrectly. Therefore, make sure that you follow these steps carefully. Microsoft cannot guarantee that any problems resulting from the configuring of DLL files can be solved. Modifications of these settings are at your own risk. Still if you get the same error try the step below: Click on Start > All programs > A ccessories > Run In the Run window type the text below: regsvr32 olmapi32.dll  (look for the space between regsvr32 and olmapi32.

Why would you reply to such an old post instead of starting your own where people might be able to help? Where are you trying to "upload" iTunes to? Do you not mean install? Learn the proper terminology. So, you had to reload MS Office. Why? See this link to learn how to ask a question: https://support.microsoft.com/kb/555375/en-us

Hi Jaffar Shah , Thank you for posting your question in Microsoft Community. The issue description seems a bit unclear and I would like to have a better understanding before we start working on it. I would really appreciate if you could answer the following questions: 1. Is the issue specific while opening Microsoft Office Excel? 2. Have you made any recent hardware or software changes to your computer prior to the issue? Please provide us more information about the exact issue to help you fix it as soon as possible by referring the below mentioned link: Suggestions for asking a question on help forums http://support.microsoft.com/kb/555375 Your reply is very important for us to ensure a proper resolution. Please get back to us with the above information in order to assist you accordingly.

1. Trying to upload an updated version of iTunes 2. I had to reload MS Office 2007 in the last week.

Hello, Please select your language from the drop down list above to post your question in the language of your choice. The forum you posted in is for English only. If you do not find the desired language above, support options for additional international locations can be found by following the link below: http://support.microsoft.com/common/international.aspx Thanks

Hi, Which DLL is it? If a system DLL run SFC /scannow. Start - type in Search box -  COMMAND   find at top of list -  RIGHT CLICK  -  RUN AS ADMIN sfc /scannow How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program generates in Windows Vista cbs.log http://support.microsoft.com/kb/928228 Hope this helps. Rob - Bicycle - Mark Twain said it right.

Hi 1. What is the exact message that you receive? 2. When do you receive this message? 3. Do you remember making changes to your computer prior to this issue? Provide more information to troubleshoot. Refer to this article How to a ask question : http://support.microsoft.com/kb/555375

You don't. A DLL is unreadable by us mere humans. It is a Dynamic Link Library and contains routines used by other programs, EXE files.

Help us help you: http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet/newsgroups since you are posting on a web forum but the suggestions about how to write the post are applicable here too) http://support.microsoft.com/default.aspx/kb/555375 - How to Ask a Question MS-MVP - Elephant Boy Computers - Don't Panic!

check this out https://answers.microsoft.com/en-us/windows/forum/windows_10-windows_install/error-message-missing-appvlsvsubsystems64dll/1a500acd-678e-487b-9f22-9169eea3f95dhttps://answers.microsoft.com/en-us/windows/forum/windows_10-windows_install/error-message-missing-appvlsvsubsystems64dll/1a500acd-678e-487b-9f22-9169eea3f95d

I am glad it worked for you. Thanks for the reply Follow the info on those Programs. Make sure you update them once a fortnight. And scan with them occasionally to make sure you have not accidentally picked some rubbish on the Net. Spybot search & destroy can be a bit quirky to work with sometimes, and it asks about giving permissions to alter registry Keys when you install a NEW Program. If it annoys you too much, uninstall it through Start> Programs> Its listing  there has an Uninstaller in ther drop down menu for it. Each day there is more and more Scams and Malware out there Cheers. Mick Murphy - Microsoft Partner

After running both of your suggestions, it worked. Thanks for your help, ive beentrying for ages to get rid of that problem. NICE ONE

I have already given you this answer in "Appearance and Personalisation" Do NOT multi-post in differant forums. The repliers to your problems do not know where the answers are up to. Michael Murphy 6 minutes ago 0 votes MyWebSearch is Malware/Spyware, and some variants of it are a very serious problem.. Scan your Computer with these 2 Programs, one at a time. All info below, including if you have problems removing it in Normal Mode: http://www.malwarebytes.org/mbam.php Malwarebytes is as the name says, a Malware Remover! Download the Free Version from the link above. Download, install, update and scan once a fortnight.. http://www.spybot.info/en/index.html Spybot Search & Destroy 1.6.2 is a very good, FREE Anti-Spyware Program. Download, install, update, and immunize your System with it. Then SCAN with it. Update it, and scan your System once a fortnight . Important re: Safe Mode If you happen to find a problem that you can’t uninstall / delete, reboot the computer, and go into Safe Mo

Rich, Uninstall or remove the MY WEB SEARCH toolbar on the computer to get rid of this error. Cheers, Mohan || If your questions are answered, please come back and mark the reply as an answer so others can use it. how do i do this if it isnt in program list

Rich, Uninstall or remove the MY WEB SEARCH toolbar on the computer to get rid of this error. Cheers, Mohan || If your questions are answered, please come back and mark the reply as an answer so others can use it.

Looks like many others who use AVG are facing the same problem.. may be an update caused this or DLL version mismatch? (Reported at AVG forum) https://support.avg.com/answers?id=906b00000008npLAAQ https://support.avg.com/answers?id=906b0000000D5XOAA0 https://support.avg.com/answers?id=906b0000000D3YeAAK https://support.avg.com/answers?id=906b00000008npLAAQ https://support.avg.com/answers?id=906b0000000D4S2AAK

When does this error message occur.. and what's shown in the title bar in the error message dialog?

when ever I turn the machine on. When I try to launch AVG antivirus. I have updated the C++ Microsoft Visuak C++ x86 AND x64 Redistributable to the most current version. I have checked to mae sure the MSVCR110.dll /& msvcpo110.dll are in the System32 and SysWOW64 folders and still cannot run the AVG antivrus. I even did an AVG removal tool and tried to reinstall AVG and got the same error. I then rolled back my system by using restore to a previous date and am still getting the error. The error message says I cannot run AVG because the two DLL's are missing.

Hi, Unfortunately this would not be enough to understand the issue. Please more information. Refer the link: Suggestions for asking a question on help forums http://support.microsoft.com/kb/555375

Hi, There are many reasons why you are experiencing this issue. One of which is a corrupted game file. For us to further assist you with this concern, we need to collect more information. Kindly answer the questions below: Are you having the issue with all the games you are trying to download? Are you having the issue when other applications? When did the issue start? Were you able to download games before?

thanks!it help me a lot!

I ran the scan as suggested and the following message popped up after completion: windir\Logs\CBS\CBS.log C:\Windows\Logs\CBS\CBS.log

You really are an  "MVP." Perfect remedy to an  annoying problem. Many thanks!

Hi carry1.  Try running the System File Checker.  Click on Start and type cmd in the "Search programs and files" box. Cmd.exe will appear at the top of the Menu. Rightclick on it and choose "Run as Administrator". Once the Command Prompt opens, type "sfc /scannow" without the quotes and hit Enter.  The System File Checker will start. It might take a while to complete so be patient. Reboot when it has completed and let us know if this helped. If not, please post the error message in full. MVP (Windows Desktop Experience) Ann Marie I have been suffering through no having DCIMAN32.dll fo two years; having the screen flickering all the time and that error message pops-up everytime I am on my computer. Thanxs to you all that is a thing of the past. It worked like a true champ.

...Beautiful...!

How do I resolve the problem? The dciman32.dll file is the Dynamic Link Library for the Display Control Interface (DCI) Manager. The DCI manager is used to improve graphics performance when using direct video memory access. Applications that typically rely on the dciman32.dll file for performance include games, CAD drawing applications, and graphics editing software. The error message displayed may differ slightly depending on which program it is affecting, but will generally be similar to the following: * "The file dciman32.dll is missing." * "Cannot find the file dciman32.dll" * "This application has failed to start because dciman32.dll was not found"

The dciman32.dll file is the Dynamic Link Library for the Display Control Interface (DCI) Manager. The DCI manager is used to improve graphics performance when using direct video memory access. Applications that typically rely on the dciman32.dll file for performance include games, CAD drawing applications, and graphics editing software. The error message displayed may differ slightly depending on which program it is affecting, but will generally be similar to the following: * "The file dciman32.dll is missing." * "Cannot find the file dciman32.dll" * "This application has failed to start because dciman32.dll was not found"

Hi carry1.  Try running the System File Checker.  Click on Start and type cmd in the "Search programs and files" box. Cmd.exe will appear at the top of the Menu. Rightclick on it and choose "Run as Administrator". Once the Command Prompt opens, type "sfc /scannow" without the quotes and hit Enter.  The System File Checker will start. It might take a while to complete so be patient. Reboot when it has completed and let us know if this helped. If not, please post the error message in full. MVP (Windows Desktop Experience)

Thank you for your assistance by posting this information on this site. I have asked the "experts" and they gave me the run around and suggested I buy programs to fix this problem, but also added it may not work. Your advice took 15 mins and I was able to do other tasks while the system was being fixed. You are greatly appreciated!

which DLL is missing and can't be loaded? "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

Hello I am a fellow community member here to help. I would recommend to see the following help article https://support.microsoft.com/en-us/help/929833...

James try the answers in this thread http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/sqlite3-wal-checkpoint-can-not-be-located-in/8b31c2b3-67cb-440c-b39b-4792c77c7eea

What Troubleshooting have you done thus far? Have you searched in Event Viewer? Any Error messages? Please provide MORE details re your current problem. We are better able to help you if you help yourself by providing us with as much information as possible.. Suggestions for asking for help on a site. http://support.microsoft.com/kb/555375 http://www.catb.org/~esr/faqs/smart-questions.html http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/what-information-to-post-in-the-windows-update/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

Hi krissy Eileen, 1. What is the complete error message you are getting? 2. When exactly are you getting this message? 3. Do you remember making any changes to the computer prior to this issue? Your question does not contain all the required information needed for us to help you. Please re-write your question, this time make sure you have all the needed info and we'll try to help. Refer the below link: How to ask a question http://support.microsoft.com/kb/555375

Hello Bruce, One possible reason why you are getting this error message is because of a third-party application conflict. We suggest that you refer to the steps provided by RichardEiler to download and install the necessary software for this third-party application to work on this thread . Let us know if you will need further assistance.

This is related to HP 3D DriveGuard. See solution at top of pg. in this thread. https://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/AccelerometerSt-exe-System-Error-VCRUNTIME140-dll-at-start/td-p/6138235

Hi, More information required. "Suggestions for asking a question on help forums" http://support.microsoft.com/kb/555375/en-us Cheers.

Hi gearhead7, Thank you for visiting Microsoft Windows Vista answers forum. The issue here seems to be with the missing system file “iphlpapi.dll”. We can try running the System File Checker tool to repair or replace the missing system file. Please follow the steps as below to the System File Checker as the first steps: 1. Click Start and then type cmd in the Start Search box. 2. In the results area, right-click cmd.exe, and then click Run as administrator. You will be prompted to type the password for an administrator account. Click Continue if you are the administrator or type the administrator password. Then, click Continue. 3. At the command prompt, type Sfc /scannow, and then press ENTER. Note: The scan may take some time, so be patient. Windows will repair any corrupted or missing files that it finds. If information from the installation CD is needed to repair the problem, you may be prompted to insert your Windows Vista CD. For reference you may visit the following KB Article li

Hi kidsubaru, a) What exactly is the issue here? b) Which Operating System do you have issues with? c) What is the exact error message you get with a specific error code(if any)? There are several different ways that system86.dll errors can show up on your computer. Here are some of the more common ways that you might see system86.dll errors: http://windows.microsoft.com/en-US/windows7/Startup-Repair-frequently-asked-questions Azeez Nadeem - Microsoft Support

After all this I am still having troubles with my system86.dll file The problem is that mine somehow got deleted and I cant find it anymore. Is there any way of safely downloading a new file? because it is said in this artical that you should not download it on dll file download sites since its unsafe?

Hi Please select your language from the drop down list above to post your question in the language of your choice. The forum you posted in is for English only. If you do not find the desired language above, support options for additional international locations can be found by following the link below: http://support.microsoft.com/common/international.aspx

Hi, To better assist you, we'd like to know the following: Are you having issue installing Windows 10? What exactly is happening on your Windows? Are getting any error message? What troubleshooting steps have you done so far? We look forward to your response. Thank you.

Hi pcgurus, the file VCRUNTIME140.dl is part d the Visual C++ Redistributable for Visual Studio 2015 You should download that and install it to resolve these errors: https://www.microsoft.com/en-ie/download/detail...

Hi PC. I'm Greg, an installation specialist and 8 year Windows MVP, here to help you. See how to fix .dll error here: https://www.thewindowsclub.com/vcruntime140-dll... https://www.thewindowsclub.com/fix-missing-dll-... I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it's resolved. ________________________________________________________ Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

Hi Carol: I would be not using my computer at all, or in the middle of checking e-mail, etc.  What ever I do, I can be logged off then I would see several windows of the same thing.  "There was a problem starting C:\Program^1\Common^1\System\SysMenu.dll The^ symbol is a squiggley, I don't know which key to show you the squiggle.    I am afraid that my computer is getting ready to crash I have Mcafee and Slim cleaner as protectors,  Please help if you can Thank you

You'll need to provide more detailed info. before someone can address your problem. Where and when do you see a pop up window? What's the exact message you get? When did this problem start? Meaning, had you made any changes including installing/uninstalling a program?

That type of message indicates something was removed, or partially removed, but there's still ref to it. Perhaps this is the problem, an adware program infection. Follow these steps and see if that solves the problem: Remove SysMenu.dll RunDLL error from Windows Start-up As for SlimCleaner, it's a rogue program. Get rid of it. Follow the steps here: https://malwarefixes.com/remove-slimcleaner-plus/ Will be looking forward to hearing things are good now! :) FYI the location is C:\Program Files (x86)\Common Files\System

Hello, Based on the information you have provided, kindly answer the following questions so we can isolate the cause of the issue: Were there any recent changes on your device? Were there any external devices connected to your computer when it happened? Have you recently installed any software? What troubleshooting steps have you done so far? We'll keep an eye out for your response.

See discussion: http://answers.microsoft.com/en-us/windows/forum/windows_7-update/missing-entry-run-dll-entry-16/8e49dc14-089e-4b2a-8896-5895dfbb7121

reinstalling which program?

The message comes up when I open up. I delete it and continue as usual. It appears at Windows start up

http://answers.microsoft.com/en-us/windows/forum/windows_xp-desktop/rundll-error-loading/e19e838d-ae3d-49a0-8c4f-2123f341ecba

Are you seeing this message. at windows start up ? or just when opening internet explorer?

I have also gotten this message recently...I was wondering if it was a virus. If not how do I go about getting this file and reinstalling same

Hello riverrat2, 1. Why would you like to install this dll file? 2. Do you get any error related to this dll file? Please give us more information on what exactly you are trying to accomplish. What are the related errors you get. Check out this article that will give you information on ‘How to ask Question and what information is required’: http://support.microsoft.com/kb/555375 I see that the wpwin12.dll is a component of Word Perfect. If you are getting any errors related to this, I suggest that you reinstall the program. This should install the file. Thanks, Irfan H, Microsoft Answers Support Engineer. Visit our Microsoft Answers Feedback Forum and let us know what you think.

What are you doing when you see this error message? Have you experienced this issue since you first upgraded or clean installed Win8? If this has recently started to occur did you make any changes with your system?  Install any new software/hardware? Have you ran a full scan with your antivirus software?  Are you using Defender for your AV or did you install a different program?

There are a number of Google hits for it, here is one http://groups.google.com/a/googleproductforums.com/forum/#!category-topic/chrome/report-a-problem-and-get-troubleshooting-help/J7CQkg-UXn4

On a HP system, that error is usually generated by a corrupt HP #D Driveguard installation, Click HERE to download the newest version of HP 3D Driveguard from the HP server, install it and restart your system. This should fix this error message you are seeing . . .

h p windows 10  8gb ram amd a8 -4555m apu radeon[tm] hd graphics 1.60ghz 64 bit operating system  x64 based processor  jwil

What is the make and model of your PC? Can you also please provide a screenshot of the dialog that is popping up on your System . . .

Hi DANIELECKZZ, Thank you for posting your query in Microsoft Community Forums. The issue description seems a bit unclear and I would like to have a better understanding before we start working on it. I would really appreciate if you can help me with the following information. 1. When exactly do you receive this error message? 2. What is the exact/complete error message? 3. On which game are you facing this issue? 4. Did you make any changes on the computer prior to this issue? Please refer to the mentioned link prior to posting a question so that you may provide all the relevant information, for us to help you: Suggestions for asking a question on help forums: http://support.microsoft.com/kb/555375 Keep us posted if you face any issues on Windows in future. We will be glad to help you.

I have moved your question to the correct Windows 10 Forums, as you had posted to the Windows 8.1 Forums.

I get error code 800700C1 and 800700C0 when installing Windows 10

Trying to install Windows 10

Hi, What are you doing when you get the errors? And what are the exact error messages? "Suggestions for asking a question on help forums" http://support.microsoft.com/kb/555375/en-us Cheers.

Hello Steve, It is possible that the said .dll file is corrupted. To assist you with your concern, we suggest that run the System File Checker (SFC) to scan and fix corrupted system files. You can refer to this article on how to run the System File Checker. Let us know how it goes. Regards.

Hi Scubasteve004, We would like to know more information about the computer. Please answer the following questions as best you can, so that we can assist you better. 1. Which is the edition of Windows Vista installed on the computer? 2. When exactly do you get the error message? Microsoft Answers Feedback Forum and let us know what you think.

MSVCR110.dll window keeps popping up..how do i re~install to my asus laptop??..please help Hello, To resolve the MSVCR110.dll error, please check Yaqub K 's post on this link . Let us know how it goes.

DLL file relocated in memory How to ask a question

Hi ssnknpatty, Provide more information on the issue: · What are you trying to accomplish? · What is the service pack installed on your computer? · When exactly do you get this error message? Is it while working on any particular application? · What is the complete error message you are receiving with the error code if any? Refer the below link which will help you give more information on the issue: How to ask question: http://support.microsoft.com/kb/555375 Regards: Samhrutha G S - Microsoft Support. Visit our Microsoft Answers Feedback Forum and let us know what you think.

Hello bernirkl, Install the Visual C++ 2008 Runtime v9.0.30729.4148 KB973552/KB969706 Download from --> http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=2051a0c1-c9b5-4b0a-a8f5-770a549fd78c You will find both 32-bit and 64-bit versions of the Visual C++ 2008 Runtime available for download there. Choose the one approriate for your Operating System. Cheers and good luck!

Thanks for clearing that up.  With some more information, I think we can solve this: 1. What exactly are you doing when the error occurs? 2. What version of Outlook do you have? 3. What version of Windows do you have? Steve Winograd MS-MVP (Windows Desktop Experience) Steve, I'm having a similar problem. Just updated to Windows 7 and reinstalled Outlook 2000. Can receive emails OK but whenever I try to send an email or click on the "To" button, receive error message stating "An error occurred while attempting to open Windows Address Book. Unable to find WAB DLL". Also can't creat any new contacts or calendar entires. Hope someone can help!!!! Regards, Tony.

When I try to save an edit in Microsoft OUTLOOK and a few other programs, I get a message that WWW32.dll is missing.

Hi, Steve--it seems to be a wab dll file that comes up missing when I try to save in OUTLOOK.

As I understand it, the only versions of Outlook that work on Windows 7 are Outlook 2007 and Outlook 2003.  Earlier versions aren't compatible with Windows 7.

I can't find any information about "WWW32.dll".  What is it?  How do you know that it's missing and needs to be installed?  What are you trying to do? Steve Winograd MS-MVP (Windows Desktop Experience)

Thanks for clearing that up.  With some more information, I think we can solve this: 1. What exactly are you doing when the error occurs? 2. What version of Outlook do you have? 3. What version of Windows do you have? Steve Winograd MS-MVP (Windows Desktop Experience)

My computer has a file named WOW32.dll, but nothing named WWW32.dll.  Are you sure about that name?  What is the complete text of the error message? Steve Winograd MS-MVP (Windows Desktop Experience)

Appreciate your quick reply. I want to back-up my files first and will let you know if this works. Thanks. MjH

You appear to have some residual reference to a virus or spyware program that your virus scanner disabled. Here is how you can find out what it is: - Boot into Safe Mode - Click Start - Type the word msconfig into the Search box and press Enter - Untick every tick mark under the Startup tab. - Click the Services tab, then tick the box that hides the Microsoft services. - Untick every remaining tick mark. - Physically disconnect the machine from the Internet. - Reboot in Normal Mode. - If this fixes the problem, restore the tick marks in groups of 8 until you find the culprit. _________________________ If this response resolves your problem, please click "Propose as answer" so that the thread can be closed. Thanks.

Hi LyricsterATL, I’d suggest you to run System File Checker (SFC) scan on your computer to fix the issue. SFC tool scans system files and replaces incorrect versions of the system files by using the correct versions. See How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7 for instructions. Gokul - Microsoft Support [If this post was helpful, please click the "Vote as Helpful" (green triangle) button. If it helps in resolving your issue, click "Propose As Answer" or "Mark as Answer" button. By proposing/marking a post as Answered, or Helpful you help others find the answer faster.]

The scan didnt really work for me. :( It says it cannot execute the file, or something like that. What do i do? help!!! please.

Using Office 365 on Windows 10.  All of a sudden Outlook doesn't start and says drivers d3d10_1.dll and d3d11.dll cannot be found in file path.  What do I do ? Those DLLs are related to DirectX What is Direct X 12 and Why is it Important? https://www.howtogeek.com/221115/what-is-direct-x-12-and-why-is-it-important/ Which version of DirectX is on your PC? https://support.microsoft.com/en-us/help/15061/windows-which-version-directx How to install the latest version of DirectX https://support.microsoft.com/en-us/help/179113/how-to-install-the-latest-version-of-directx

Run the system file checker sfc to fix corrupt win system files https://support.microsoft.com/en-us/help/929833/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files And if that doesn't cure the problem re-post to a win10 group as its a win problem, not an Office prob

Hi HoneyFriedHam , Scenario 1: Cause of I. Suuresh Kumar - Microsoft Support. Visit our Microsoft Answers Feedback Forum and let us know what you think.

Hi HoneyFriedHam, I had to call Dell to get the error corrected.  The techie said that is a problem with a microsoft update and restored my computer to a restore date of Thursday.  Which corrected the error.  He said that Microsoft is aware of the problem and should have a patch to the update within the next 5 days. Good luck

http://support.microsoft.com/kb/929833 shows me that I have many direct X files that started missing around the same time frame. The missing files are only distributed with the OS so recovery is very difficult and this is very bad if it was caused by the update. Does anybody have more information on this?

Generally indicates a problem with DirectX see if this previous answer helps http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/system-error-d3d101dll-and-d3d9dll-are-missing/12b3fd74-1083-4193-bbbc-413fdf11edd7

Andre', I checked c:\ with system files unhidden and cant see a directory called localdumps. I tried sfc and it found errors but couldnt fix them. The log that this generates is quite huge and had several references to d3d10_1.dll backup being corrupt. I've hacked around and found several copies of d3d10_1.dll in various folders so I copied the one out of directx into system 32 (renamed the current one to d3dcorrupt, it is quite a fair bit larger than the one I replaced it wth). I no longer get the same error but I get an error with wdm.exe - I dont remember to hand exactly what the error was (eg. something like, but probably not 0xc0000076) I checked and it was a file access problem. What exactly does your reg file do?

The reg adds an entry Localdumps under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps This is explained here: http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx upload the CBS.log to your SkyDrive. "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

Hi, This is mostly caused by a incompatible Shell Extension. please download this reg file from my SkyDrive: http://cid-128fc518635be2dc.skydrive.live.com/self.aspx/.Public/MS%20Foren/Registry/WER%5E_Explorer.reg and make a double click on the file to import it. If you can't do this, run regedit.exe and import the registry file there! When the Windows Explorer crashes, Windows Error Reporting Service [1] creates a dmp file under C:\Localdumps. Please upload the file to your public Skydrive [2] folder and post the link here. I take a look at the dump with the Debugger, maybe I can see which Shell extension is the cause. For the DLL file issue, please start the command prompt (cmd.exe) with admin rights [3] and run sfc [4]: sfc.exe /scannow Is it able to find and repair broken files? best regards André [1] http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx [2] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [3] http://w

Hi, Let me help you with your issue that you're unable to launch Movie Maker. For us to troubleshoot your issue, kindly try to do a clean uninstall. This process has steps that would permanently remove all Windows Live Essential related files on the system giving you a fresh new state to work on. You may follow the steps on this link . Your cooperation on this matter will be highly appreciated. I'll look forward to your reply. Thank you.

Thanks. Movie Maker works now.

You will find all support for installing/uninstalling/upgrading to Windows Live Essentials 2011 (including Windows Live Mail & Photo Gallery) in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec ~Robear Dyer (PA Bear) ~ MS MVP (IE, Mail, Security, Windows & Update Services) since 2002 ~ Disclaimer: MS MVPs neither represent nor work for Microsoft

Probably way to late to help you now, but i had the same problem, and couldn't find an answer on-line. eventually i reinstalled internet explorer, and that got it working again, hope this will help others

Hi Meghmala.. Thanks for your help. The results are........... Method 1: I tried to open up the DirectX Diagnostic Tool... but a window popped up saying: "Error: Could not load DXDIAGN.DLL" So there goes that method. Method 2: I performed the SFC scan as per the steps shown above, and it said: Verification 100% complete. Windows Resource Protection found corrupt files but was unable to fix some of th em. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log I then tried to open the log by typing: findstr /C:"[SR] Cannot repair member file" %windir%\logs\cbs\cbs.log >sfcdetails.txt and nothing happened. I also typed "sfcdetails.txt" .. and notepad popped up, but it was blank. I'm not tech smart. So don't know much about the commands and whatnot. Since the error occured, MSN (well, Windows Live altogether) hasn't been working (msnmsgr.exe - Application Error, The application was unable to start correctly (0xc000007b). Click OK to close the a

Hi t_gee, Step 1: You may check if the hard disk is having errors or corrupt sectors, which is causing the issue. I would suggest you to use check disk command and check and repair for any errors on hard disk. Warning: Microsoft does not recommend Microsoft Answers Feedback Forum and let us know what you think

Thanks for that.. I've done what you suggested.. and the problem still exists. Is there anything else I can try?

Hi Meghmala, My laptop is now working. But I didn't do what you suggested above. It was about a week before you posted that last reply. So the last thing I did was the SFC scan -as you suggested. I then found in one of my folders a "registration entry" file (.reg) .. the name of the file is called "cc_20110122_205732" .. I just happened to click on it.. and a box popped up saying something along the lines of .. if I click ok or continue with the action.. changes could/will be made.. I can't remember exactly. Then I restarted my computer.. and everything was back to normal. So I think it had something to do with that and the sfc scan? I'm not completely sure. But am just happy everything works now. Thanks again for your help. Greatly appreciated! Regards, t_gee

I just checked what that box said when I click on it. It says.. Adding information can unintentionally change or delete values and cause components to stop working correctly. If you do not trust the source of this information in C:\Users\Documents\cc_20110122_205732.reg, do not add it to the registry. Are you sure you want to continue? Then I clicked on "Yes".. and when I restarted the computer.. everything all worked~! Thanks again for helping!!

I would follow the suggestions (the marked answer) from this thread: http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/111796e9-f6d3-48b7-bb60-0a97e2c64000 . "192 GB ought to be enough for anybody." (from the miniseries "Next Generation's Jokes")

Hi t_gee, Method 1: The file d3d10_1.dll is related to DirectX. You may use the DirectX diagnostic tool and check if it lists any issues. Open DirectX Diagnostic Tool by clicking the Start Microsoft Answers Feedback Forum and let us know what you think

LOL so u messed up ur Windows by having run CCleaner (= cr*p cleaner), and to be more precise it's registry "cleaning" module. As u've learned the hard way, not just unnecessary, but even destructive .. (nerni-nerni-ner-ner! .. ;) ) It should be possible to solve this error by reinstalling the latest DirectX runtimes (appropriate for the effected Windows version).

Hello Chris, Welcome to Microsoft Community Forum. I would request you to refer to the suggestions by Meghmala replied on February 9, 2011 . This has helped some of our community members to get this problem resolved. This can also be a possible fix for the issue in question. http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-d3d101dll-dwm-bad-image/c7ccb606-b627-4df9-bbaf-af3f97c8c03a Warning: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For safety you can back up your data before using the check disk command if you can. Note: After performing In-Place Upgrade, your personal data and installed programs will not be removed but we may need to run Windows Update to install all the available updates for your system to update these system files to the current version. This troubleshooting process is time consuming and may take several hours to complete. War

i tried to run sfc/scannow and i get a message that another program is running a scan in the background and to , reboot system..... this just repeats over and over , any thoughts?

Hi Sneakscape , I would suggest you to perform system restore on your computer from WinRe and check if you are able to restore to the correctly working settings . Visit our Microsoft Answers Feedback Forum and let us know what you think. I just tried both of those things. Nothing was any different after restoring back to 17/01/11, and when SFC was done verification, I got the message "Windows Resource Protection could not perform the requested operation." Any other suggestions?

Hi Sneakscape , I would suggest you to perform system restore on your computer from WinRe and check if you are able to restore to the correctly working settings . I. Suuresh Kumar - Microsoft Support. Visit our Microsoft Answers Feedback Forum and let us know what you think.